Aacess equipments

Various types of cable pulling devices?

Cable pulling equipment help underground cable installers pull cables through multiple bends. This type of equipment is particularly useful when cables are buried underground. The cable puller is versatile enough to work with copper, aluminum, and fiber cables. Know more about cable pulling tools.

There are three main types of cable pull devices:

• Pull the grip: Helps the contractor reduce the risk of getting caught during installation and removal of underground cables.

• Support Grip: A disposable tool that supports the weight of cables used in vertical and inclined travel.

• Strain relief device: bend the cable in turn before installation and remove the over-bent damaged electrical cable.

Pull the cable:

Cable extraction is one of these important tasks, and more and more fiber optic cables and network connections are required, especially as technology advances and expand.

Pulling the wire is a big part of being an electrician. It may seem like a fairly basic process for your day. However, if no appropriate action is taken during the pull, it can mean a wire that needs to be replaced due to loss of time, loss of patience, and possibly damage due to a pull failure.

Types of cable pulling:

Pull the conduit:

When installing or rewiring different types of wires, such as wires, speaker wires, telephones, internet cables, etc., it is often necessary to route new wires through existing conduits or pipes. Looking for Cable Pulling Winch Manufacturers

Cable installation:

To install a new cable on the ceiling of a facility such as a hospital or clean room, you need to pull a different type of cable. The best way to ensure the cable pulling process is smooth is to use the right tool. In this case, it can be a cabled access point.

Pull a large cable:

Larger cable drawing projects are particularly common in new construction projects. These may include cable bundles, conduits, or many other difficult materials, but because the cables are installed in an unfinished building, access to the ceiling is usually not necessary.

Cable pulling lubricant types:

Currently, below types of cable pull lubricants are on the market. These are the majority types of products sold in the market.

1. Wax-based lubricant is a stabilized water-in-oil emulsion. They have a very low coefficient of friction and are ideal for pulling very long cables (over 1,000 feet). However, the time required for 100% evaporation of the water component is also very long. Most of us know this type of lubricant as “Yellow 77”.

2. Polymer-based lubricants are gel matrix compounds that contain various amounts of acrylic acid polymers, along with various hydrocarbon lubricant systems. For example, glycol, quaternary, detergent, soap. Cold-resistant polymer-based lubricants are heavily loaded with propylene (or ethylene) glycol, which remains liquid at low temperatures and has a very long drying time. Some cable pulling lubricants have a very fast drying time. Cable Puller Machine

Tips for pulling wires:

The most important things to remember when preparing a wire pull, big or small.

1-pull evaluation to prove your conduit.

2- Clean the conduit entrance and exit.

3-Provide proper lubrication.

How to Operate Electric Wire Rope Hoist?

In industry purpose it is very important to get the best quality and control wire rope hoist but it is also important to best out this machine with the industry experts to grow and explore.

Hoist is a device used for lifting the loads with help of drum or lift, Electric Wire rope Hoist means use the electricity to lift the heavy loads with the help of drums which is adjusted by rope or chain.

Electric Wire Rope hoist are composed of an electric motors, Gearboxes, Rope drum with rope guides, electric panel and large wire rope connected to a hook. Electric Wire Rope Hoists are used to carry large objects weighing between 500 Kgs and 20 tons in various conditions like severe heat while welding, over the burners and furnaces or in acidic atmosphere.

Here below are the some of the things to remember make the best from the Electric Wire Rope Hoist in your Industry

Use of Electric Wire Rope Hoist:

Voltage Checking:

We need to check Voltage because every product is made for a different electric force. So check the voltage required for your product before bringing it to use. If there is a slight difference in the voltage the speed of the hoist will also differ. The Speed of the Hoist is proportional of Voltage. Attach the hoist to the power supply in case the voltage will support it.

Check the lubrication:

Confirm the gearboxes are filled up to the mark by recommended oil in hoist and the end carriages of the EOT Crane.

Avoid Untangling:

Lower the rope fully when the hoist is up and see if it is not tangled. If so, untangle it. For the successful movement of heavy load it is very important that the rope is not tangled.

Test buttons:

Once the check the Control switches of Electric hoist before adding the load .and also Test emergency stop button by pressing it, and confirm the wire rope hoist ceases movement.

Limit Switches Test:

It is the main function of the electric wire rope hoist. When the hook reaches the top it should disconnect and the same must happen when the hook reaches the ground. Repeat this practice two times.

This is a very important check that needs to be done. Check the hoist limit switch by pressing the up-button all the way. Once the hook reaches the top of the hoist the the button will be Disconnected. Repeat the test by pressing the down button.

Crane Motion Test:

This third set of the buttons helps move the crane horizontally. Test the crane by taking it to the top till the gantry rails.

Load test With Trail Run:

This first set of buttons is used to lower and lifting the load. Press the down button till the hook reaches the ground and attaches with the load, then press the up button to lift the load up and detach the hook. Looking For Electric Hoists Manufacturers

Be Safe:

Do not try to operate the electric wire rope hoist if people are under it. Stop the hoist and wait until the coast is clear. Also, ask your workers to take proper training before using it. Never stand near or under the crane whenever it is in the use. Avoid using the control buttons without any guidance.

What are the advantages of using electric hoists in the industry?

The hoist can be considered the most important component of an overhead crane system. This is because the device lifts and lowers the luggage.

When purchasing an electric chain hoist or wire rope hoist for lifting work, always consider the application, capacity, environment and duty cycle. Improperly lifting the device requires excessive maintenance and increases the potential for downtime. The result is a higher cost of ownership and lower efficiency.

Whenever you face lifting heavy objects, having the right material handling tools at hand can save you time, money and unnecessary stress. In such situations, the electric hoist is very useful.

The electric hoist is useful for lifting heavy objects. The machine can lift and move heavy objects easily and quickly. This allows you to move items comfortably and efficiently. You can save a lot of work and time, so you can keep your work costs low.

The biggest advantages of electric hoists:

Heavier loading capacity:

There is a big difference between lifting a heavy object by hand and using an Electric hoist. Electric hoists usually have a high combination of hoists and trolleys, so you can comfortably lift a wide variety of loads and move heavy loads efficiently and quickly. This means that your workers can handle these tasks without undue stress on the body.

Quiet operation:

Compared to manual or hydraulic type, the electric hoist works more quietly and can keep your work enjoyable and comfortable. If the process requires the use of a hoist daily, the electric hoist is much gentler to the ear, which greatly helps to protect the hearing.

Increase productivity:

With the electric hoist, you can carry items quickly and easily. Unlike manual hoists, which require a lot of time, the motorized version can be completed in a fraction of the time. This increases productivity increases profits and brings companies one step closer to their goals.

With an electric hoist, you can easily lift and move heavy objects, increasing your workplace productivity. Unlike manual hoists, which require a great deal of effort to operate, electric hoists help workers to work quickly without feeling excessive stress or fatigue throughout the day

Improved durability:

The electric hoist has fewer moving parts and less wear and tear than both manual and hydraulic hoists. If properly maintained and inspected regularly, the service life will be extended.

Reduce work-related costs:

Another advantage of using an electric hoist helps to reduce work-related costs. The labor required when working with an electric hoist is greatly reduced. This is due to the high capacity and efficiency of the machine.

Depending on the type of business you own, using an electric hoist can help you with fewer workers. Looking for Electric wire rope hoist Manufacturer

Versatility:

The electric lifting device increases versatility during work. You can lift a heavy load vertically or pull a load horizontally. Some hoists only allow vertical movement. They are designed to be very versatile and can lift heavy components both vertically and horizontally. Some hoists only allow vertical movement. This means that you can move items horizontally as you need to invest in two different hoists. Also read for Wire rope hoist

Less noise:

The noise generated by electric machines during operation is not as high as that generated by hydraulics and manual hoists.

What is a Crane? Different types of Cranes?

A Crane is a collection of simple machines are essentially used for heavy construction work and lifting all kind of objects. They are always equipped with at least a winder, cables, ropes and chains. These cranes are manufactured in different types of sizes and designs.

Different Types of Cranes:

There are so many different types of cranes, all of them are designed to be safe, reliable, and to be able to lift the capacity you need, depending on the type and model that you choose.

Here is below are some of the different types of cranes generally used:

Mobile Crane:

Mobile cranes are commonly mounted on wheeled vehicles, these are One of the most powerful pieces of equipment in the construction business. Different types of crane serve a temporary purpose, and a mobile crane may be little more than a robust steel boom fitted to a transportable platform. They have a maximum height of about 400 feet and can lift hundreds of thousands of pounds. mobile cranes are used for building and maintaining highways, bridges, buildings, pipelines and towers.

Gantry Crane:

Gantry cranes have become the most popular alternative to overhead bridge cranes. Gantry cranes can be used in various industries. These machines are available in fixed or adjustable heights and are made of steel or aluminium depending on the purpose. This crane employs a strong overhead gantry to lift and steer very heavy industrial loads. They are similar to bridge cranes, the bridge is supported by a pair of hard steel legs carried by a pair of end tracks along the floor level runway.

Tower Crane:

A tower crane is a form of balance crane which is commonly used in urban construction sites. They are used to lift concrete, steel, large tools, and a variety of other building materials. A tower crane is controlled by a driver who either sits high above in a small cabin located at the top of the tower or else uses a remote control system to operate his machine from the ground. They often rise hundreds of feet into the air and can reach out just as far.

EOT Cranes :

EOT Cranes are the most common lifting solutions used in a variety of workplaces, such as assembly lines, research facilities and manufacturing plants.

EOT Cranes, or electric overhead travelling cranes, consist of one or more beams that can move along a supporting gantry rail. Pelloby is a leading EOT crane manufacturer that designs and manufactures customized systems to meet all lift requirements. Looking For EOT Crane Manufacturer

Marine crane:

Marine cranes are mostly located on the shoreline or attached to the ship or the ship itself. They are used to lift and place the boat from the shore into the water or, if attached to the ship, to lift objects back into the ship or into the water.

Crawler crane:

A crawler crane is basically a crane for a caterpillar truck. This crane is generally very stable. Its broad base and tracking disperse weight over a wide range.

Industrial cranes:

Industrial cranes are material movement machines that use levers and pulleys to operate long trusses and arms to lift, lower, carry, or move small machines or anything that can not be moved manually. Designed for use in specific configurations.

Aerial crane or flying crane:

Aerial cranes are also known as flight cranes or sky cranes. Aerial cranes provide the largest range of any crane, which is probably part of the aircraft.

Loader cranes:

These are Also known as knuckle-boom cranes or articulating cranes, these cranes are attached to trailers. Their hydraulically powered arms have a simple purpose – to load and unload material and equipment of a wide range of weight onto and off of a trailer.

Advantages of Lifts or Elevators for Home

Nowadays many of the home owners prefer adding an elevator or Lifts to their home. There are a number of reasons why people wish to install lifts in their homes. Installing an elevator can be a great help to improve the value of your home and lifestyle.

If you have elderly parents or physically challenged individuals in your family , and people aged between 45+ are the most common purchasers definitely think of adding a home elevator to your interiors. Looking Small lifts for your Home

Lifts make access between levels in a home easier for anyone who has limited mobility, including the elderly, people using a walker or crutches, new parents with prams and those in wheelchairs. In other cases, a homeowner may choose to install an elevator in a new home or add a lift during a remodel. Lifts are a modern, attractive feature that is both thoughtful and practical – a great future-proofing option that enables easy access for all.

The trick behind choosing the best residential elevator for you, your family, and your home begins with your understanding of exactly what you expect to get out of your new in-home addition.

Home lifts were once seen as an expensive and extravagant feature reserved for the very rich. Most of the architects and designers are specifying Home Lifts in their Design planning at the time of building construction planning’s. Find Best Elevator manufacturer‎

Benefits of Home Lifts or Elevators in Home:

Safety for the Whole Family and Improved Home Safety

Stairs are far more dangerous than people often think. Every year millions of people are seriously injured or even killed due to stairway falls or accidents.

In case if you have kids and Small children’s, or if you or someone living in your home has limited mobility, then lift or Elevators are most helpful.

Accidents aside, elevators can improve the safety of your home by restricting access to specific areas. Adding a home lift is a safe alternative to stairs for family and friends. The home lift is also useful for four-legged friends, and for pets who struggle to climb the stairs.Get a QuoteLifts for home

Increases Property Value:

Installing an elevator in your home not only means that you can enjoy the convenience and luxury that it gives while you live in the home, but also the value of your property if you decide to sell It also increases. Home lifts are attractive features that can be sold as a benefit to almost any potential buyer. Additionally, it means the house will be attractive to a larger pool of house hunters who may otherwise be deterred by the stairs or accessibility issues.

Flexible:

Carrying large items or heavy loads up the stairs is a big task. It can be tiring, hard, and most of all dangerous. A lift provides an efficient and convenient solution to transport goods with ease, including shopping, luggage, prams, laundry, rubbish, and more.

Installing a Home Lift

There are number of reasons why you should install an elevator in your home.

A home lift maximum increases the safety and accessibility of your home. In addition to that, an elevator can also improve the value and longevity of your property. Find Residential lifts

What are the Different Types of Welding?

Welding is the process of combining two or more parts with the help of heat or pressure…It is usually used in materials and Thermoplastics and nowadays it welding is also applying on wood.

There are several Different Types of Welding Equipments we are using…Let’s have a look on different types of Welding.

Gas Metal Arc Welding:

It is a process that creates an electric arc between a consumable electrode and the metal you’re welding to heat it and allow you to fuse it. Looking for Welding Rotators Manufacturers

Shielded Metal Arc Welding:

Shielded metal arc welding (SMAW) is one of the most popular welding processes. Sometimes referred to as “stick welding,” it’s a process that (like the GMAW welding processes) also uses a consumable electrode. It’s a versatile and simple process, which makes it a popular choice for welding a variety of materials, including iron, steel, and aluminum.

MIG (Metal Inert Gas) Welding:

MIG welding is one of the easier types of welding for beginners. It is concept of combining two pieces of metal together with a wire that is connected to an electrode current. MIG welding is actually two types of welding. The first uses a bare wire and a second flux core. Thin metal pieces can be joined using wire MIG welding.

Stick Welding:

It is also known as Arc welding, it is doing by using old style method. Compare to MIG Welding Stick welding is bit harder but we can use this welding equipment for very little works at home. Stick welding uses a stick electrode welding rod. Know more about Welding roller Manufacturers

TIG Welding:

Gas Tungsten Arc Welding, commonly called TIG or Heliarc, it is one of the more difficult welding technique is a welding process that uses a non-consumable tungsten electrode to heat the base metal and it is used to create a molten weld puddle. TIG welding requires both hands. Move the rod with one hand and hold the TIG torch with the other hand. This torch generates heat and arc used to weld most conventional metals including aluminum, steel, nickel alloys, copper alloys, cobalt and titanium.

This type of welding requires a lot of expertise because the welder is a very complex process. This welding process is employed to carry out high-quality work when a superior standard finish is required, without making use of excessive clean up by sanding or grinding.

Shielded Metal Arc Welding:

Shielded metal arc welding (SMAW) is one of the most popular welding processes. Some of the times it is also referred to as Stick welding, it’s a process that also uses a consumable electrode. It’s a versatile and simple process, which makes it a popular choice for welding a variety of materials, including iron, steel, and aluminum.

Flux-cored Arc Welding:

Flux-cored arc welding (FCAW or FCA) is an automatic or semi-automatic welding process. Flux-cored welding utilizes a continuously fed electrode, Developed as an alternative method to SMAW, it doesn’t require the stick electrode used in stick welding and instead uses a consumable tubular electrode. Get a Quote on Welding Booms Equipments

Some FCAW processes require no shielding gas, while others do. Shielding gases (either inert or active) help protect the weld area from damage caused by oxygen, water vapor, or other contaminants.

How to Operate Electric Wire Rope Hoist?

In industry purpose it is very important to get the best quality and control wire rope hoist but it is also important to best out this machine with the industry experts to grow and explore.

Here below are the some of the things to remember make the best from the Electric Wire Rope Hoist in your Industry

Use of Electric Wire Rope Hoist:

Voltage Checking:

Check the lubrication:

Confirm the gearboxes are filled up to the mark by recommended oil in hoist and the end carriages of the EOT Crane.

Avoid Untangling:

Lower the rope fully when the hoist is up and see if it is not tangled. If so, untangle it. For the successful movement of heavy load it is very important that the rope is not tangled.

Test buttons:

Once the check the Control switches of Electric hoist before adding the load .and also Test emergency stop button by pressing it, and confirm the wire rope hoist ceases movement.

Limit Switches Test:

It is the main function of the electric wire rope hoist. When the hook reaches the top it should disconnect and the same must happen when the hook reaches the ground. Repeat this practice two times.

Crane Motion Test:

This third set of the buttons helps move the crane horizontally. Test the crane by taking it to the top till the gantry rails.

Load test With Trail Run:

Be Safe:

List the Different Types of Gantry cranes?

Gantry crane is a type of overhead crane that is similar to a bridge crane with a single or double girder configuration supported by freestanding legs that move on wheels or along a track or rail system.

These are widely used when lifting is required without the cost of building or supporting steel work. The term “gantry crane” is often used in the material handling industry.

Gantry cranes are usually considered when there is no reason to incorporate an overhead runway system. Cranes use legs to support bridges, trolleys, and hoists. These legs move on tires and rails embedded in the floor or ground .

It is flexible in its design because it doesn’t rely on building supports and can be designed to be mobile; there are some things you’ll need to consider if you want to utilize a gantry crane in your facility.

Here some of the various types of Gantry Cranes are listed:

1. Full Gantry Crane Systems:

Full gantry crane systems are the most popular configuration, consists of two legs which ride on a rail that is embedded flush with the top surface of the floor. These cranes normally run in a straight line in the particularly dedicated areas only.

This design allows motorized equipment like scissor lifts, forklifts, carts, and trucks to roll over it and cross through underneath the crane.

2. Semi-Gantry Crane Systems:

Gantry cranes can also be designed with one leg riding on wheels and are advantageous when you have a very little workspace. This setup doesn’t require two runways supported by or tied back to building columns like bridge cranes.

3 .Portable Gantry Crane Systems:

Portable gantry cranes are smaller and light in weight and they run on rubber wheels or casters. When they’re empty and not under load, they can be moved or stored anywhere throughout a shop or into different work cells to offer greater space-saving and floor space flexibility. Also search forIndustrial Cranes

4. Adjustable Gantry Cranes:

These cranes can be designed with variable height and span design and allow the user to adjust the crane according to the requirement. When transporting a gantry system in and out of a facility or through different areas of a shop.

5. Rubber Tired Gantry Cranes:

Typically these cranes are wheeled with rubber tires .Cause of this structure; these cranes do not require a rail for mobility. These are usually smaller than the other gantry cranes which enable the rubber tires to handle their load.

Uses of Gantry Cranes in the Industry:

1. Gantry cranes are commonly used for heavy fabrication applications, or in some type of outdoor yard—rail yards, shipping and container yards, steel yards, and scrap yards.

2. Gantry cranes are the ones that are usually deployed in the shipbuilding industry.

3. There are small sized cranes which can be used to lift the automobile engines from the vehicles. Searching for EOT Crane Manufacturer

4. The small-sized gantry cranes can be used in the manufacturing units. They will help in moving the parts from one place to another. There will be a requirement of heavy weight lifting objects all the time. These cranes will help in lifting process.

winches & hoists Manufacturer’s

Hoists and Winches, which is manufactured using best quality material, sourced from the dependable vendors of the market.

Aacess Equipments are the leading Industrial Material manufacturing company in the India given their best service in Winches and Hoists, specialized in manufacturing Hydraulic Winch ,Electric Hoists, Electric wire rope hoist, Wire rope hoist under the talented professionals as per industry standards.

Our Key features:

On-time Delivery

Competitive Prices

Complete Quality Assurance

Manufacturing Facility

Efficient After Sales Service

Contact:9866309943

Elevator Manufacturer’s

Aacess Equipments are one of the Largest Material Handling and suppliers India, We are specialized and giving best quality service providers in Home elevators, Lifts and Residential Elevator Manufacturers based on the clients requirements…

We expertise in developing high quality home lifts used in Duplex and Triplex Bungalows /houses.

We offer Small lifts Elevator manufacturer‎
Lifts for home Residential lifts